Chemical Processing Support Nanotechnology Peristaltic Pump

Chemical Processing Support Nanotechnology Peristaltic Pump

Nanotechnology Peristaltic Tube  Pump BT600M, As a transfer liquid Peristaltic Tube Pump, it with a LED four-digit display, adjustable speed, easy to operate, compact structure, and small space occupation.The peristaltic is a high-precision constant flow pump, the max flowrate is 2280ml/min.

Basic Peristaltic Pump with two display modes, the direction can be changed based on different work status, it has the same flow capacity in both directions.

Tube pumps will not contact with liquid, food-grade tubes ensure clean and hygienic operation. It is anti-interference, supports a variety of external controls, accepts many kinds of signals, easier to be connected with other equipment. it’s the first choice for laboratory, sampling, dosing, medical flushing, liposuction, etc.

Features of Dosing and Metering Pumps

1, Easy operate only need to power on, then you can use it 

2, Easy load pump head, you can install and change the tube fast. 

3, If you want to change the flow, only need to rotate the control knob on the panel. 

4, Easy to control the direction by the switch on the panel 

5, 4-Led display the current speed and work status 

6, Support Multiple channels work, Which can meet your application to transfer several liquids at the same time.

The peristaltic pump system consists of three parts: the peristaltic pump driver, the Peristaltic Pump Head, and the Peristaltic Pump Tube.


Selection tube 
As a condition of Peristaltic Pump Hose
Has a certain degree of flexibility, that is, the hose can quickly recover its shape after being compressed in the radial direction
Has a certain degree of wear resistance
Have a certain ability to withstand pressure
No leakage (good air tightness)
Low adsorption, good temperature resistance, not easy to age, no swelling, corrosion resistance, low precipitation, etc.

Daily maintenance of Peristaltic Liquid Pump

In the process of daily use, try to replace the hose for the Peristaltic Tube Pump after long-term use, so that it is not easy to cause the silicone tube to break, and the liquid will flow out of the hose and flow into the roller of the pump head. The corrosive liquid will flow into the gap of the roller. The pump head of Basic Peristaltic Pump is disassembled and cleaned to avoid freezing in the gap of the roller after weathering, which will cause the pump head to jam. The hose should be replaced in time according to the frequency of use of the specific Digital Peristaltic Pump during use, or the position should be moved frequently. If the liquid is highly corrosive, please select an imported hose of the corresponding material to avoid damage to the pump.

Here show you some photos about its application