Cement grinding aid transfer peristaltic pump

2021-05-31

Cement grinding aid is a chemical additive that improves the grinding effect and performance of cement grinding. It can significantly increase the output of cement platform, the strength of cement at various ages, and improve its fluidity. The cement grinding aid can greatly reduce the phenomenon of electrostatic adsorption ball formation formed during the grinding process, and can reduce the re-agglomeration tendency of the ultrafine particles formed during the grinding process. The cement grinding aid can also significantly improve the fluidity of the cement, improve the grinding effect of the mill and the powder selection efficiency of the classifier, thereby reducing the energy consumption of the grinding. The cement produced by the grinding aid has a lower tendency of compaction and coalescence, which is beneficial to the loading and unloading of the cement and can reduce the wall hanging phenomenon of the cement storage. As a chemical additive, grinding aids can improve the distribution of cement particles and stimulate hydration power, thereby improving the early strength and late strength of cement.

Liquid cement grinding aid component

The components of liquid cement grinding aids are often: liquid grinding aid mother liquor, triethanolamine, polymeric polyol, polymeric alcoholamine, triisopropanolamine, ethylene glycol, propylene glycol, glycerol, sodium fatty acid, calcium chloride. , sodium chloride, sodium acetate, aluminum sulfate, calcium formate, wood calcium, sodium sodium and the like.

Our Peristaltic Pump usually used for the liquid cement grinding aid transfer . We always suggest the pump depend on our customer's cement grinding aid's add amount ,then introduce the suitable pump .

The most popular model is : BT100M/YZ2515x BT300M/YZ2515x BT600M/YZ1515x WT600/KZ25 ZT600SN/KZ25 ZG600/YZ35-13 BT600-S/YZ35-13 ETC .

12 Liters/min Digital Industrial Peristaltic Pump for cement grinding aid - BG600-S

This peristsaltic pump can be installed by YZ35 YZ35-13, pump heads, with flow rate from 0.13-12000 ml/min. Flow speeds can be adjusted either by hand through switching knobs, instead of the traditional way of membrane keypad, which reduces obviously the failure rate, or by automatic control through the external controller interface, with three available modes: 0-5V, 0-10V and 4-20mA. Memory function is also available in the product in case of power off. Besides, switching knobs are designed clearly so that it is easy to operate for customers.

Technical Parameter:

Model: BG600-S

Max flow rate: 12000ml/min

Display mode: 4-digit LED displays current rotating speed or flow rate

Speed Control Method: Rotary encoded knob to adjust rotating speed

Power consumption: ＜400W

Weight: 21KG

IP rating: IP31

Speed: 0.1-600rpm

Speed resolution: 0.1rpm

Power supply: AC220V±10%(standard) or AC110V ±10%(optional)

External Control: Start & stop, direction control, speed control( Analog control :0-5v, 0-10v, 4-20mA option )
RS232 and RS485 Communication interface, support MODUBUS Communication Protocol

Work Environment: Temperature 0-40℃, ＜80% relative humidity, no condensation

Previous: Chuangrui peristaltic pump for condensate discharge

Next: Peristaltic pump cr for Scientific research