Peristaltic pump before and after the pipeline configuration

2022-02-10

Most Peristaltic Pump systems consist of three components: pump head and pump pipe to meet different needs. What are the configurations of the front and rear lines of the peristaltic pump? Below by our peristaltic pump Xiaobing for a detailed explanation.
(2) To facilitate maintenance and start-up, the suction pipe should be set with a cut-off valve as close to the pump inlet as possible, with the same diameter as the pipe diameter.
(3) To protect the pump from being damaged, close to the downstream of the pump suction line cut-off valve, set the filter, usually using a T filter.
(4) Discharge pipeline should be set with cut-off valve, valve diameter is the same as pipe diameter.
(5) A safety valve should be set between the outlet of the pump and the first valve.
(6) Pressure instrument should be set at the pump outlet, located on the straight pipe section between the pump and the first valve at the outlet.

(7) In the peristaltic pump outlet pipe, the discharge valve should be set between the first valve and the pump.

If you need a peristaltic pump,please contact :www.crpump.com,sales01@crpump.com,15633705132

Previous: Application of peristaltic pump in sewage treatment

Next: What are the reasons for affecting the filling accuracy of peristaltic pump