Why Does Peristaltic Pump Not Absorb Water

2021-12-29

We often do not feed water in the use of the Peristaltic Pump, so in general, if the peristaltic pump runs normally, what are the reasons for not feeding water? Below we explain in detail for you.
One: the hose mouth at the suction range absorbs the bottom or wall of the container containing liquid.
Solution: Need to reinstall the peristaltic pump suction range of the hose.
Two: peristaltic pump suction range hose leakage place.
Solution: Replace the leaky pipeline.
Three: the suction range of the Peristaltic Pump Hose is blocked.
Solution: Clear the blockage or replace the blocked hose.
Four: the use of non-standard wall thickness of the hose, resulting in the working part of the peristaltic pump can not be tightly pressed hose, resulting in hose leakage.
Solution: Replace the hose of standard size.
Fifth: pump head pressure gap change, so that under normal use, can not close the standard hose, resulting in hose leakage.

Solution: if the pump head does not have pressure adjustment, it is necessary to replace the pump head; If the pump head has a pressure adjustment function, adjust the pressure adjustment knob until the hose is filled with water.

If you need a peristaltic pump,please contact:www.crpump.com,sales01@crpump.com,15633705132

Previous: The Characteristics of Liquid Pumping by Peristaltic Pump

Next: Application Case of Peristaltic Pump in Diamond Wire Cutting Industry