How to install and pipe peristaltic pump

2022-02-08

1. the pump should be placed smoothly, to reduce vibration, reduce noise.
2. There is a flexible or rigid short section (about 80 ~ 100 cm) between the outlet flange of the Peristaltic Pump and the connection of the pipeline, to replace the hose.
3, pump start without irrigation pump, therefore, the installation height of the pump can be above the material level and do not need an auxiliary pipeline and starting facilities, but the height difference should not exceed 20 meters.
4, in the transmission medium viscosity, particles, easy deposition, poor liquidity, the pump is generally installed below the material.
5, the use of the pump in the pipe should pay attention to minimizing elbow (especially right Angle elbow). Under normal circumstances, the outlet pipe diameter and hose diameter can be equal, for pipeline length, viscosity, flow
For materials with poor mobility, the outlet pipe diameter should be 1.2-1.3 times the diameter of the pump hose.
6, the import and export of the pump are not allowed to install the check valve.
7, peristaltic pump outlet should be equipped with a pressure gauge, to monitor the pump rotation.
8. The import and export of the pump are in the same direction as the pump, and the import and export of the pump are interchangeable, which is decided by the user according to the piping and the actual situation.

9, electrical installation should be equipped with positive and negative buttons for maintenance, pipe change, and self-cleaning.

If you need a peristaltic pump,please contact :www.crpump.com,sales01@crpump.com ,15633705132

Previous: What are the reasons for affecting the filling accuracy of peristaltic pump

Next: How to transfer bromine liquid with peristaltic pump