How to transfer bromine liquid with peristaltic pump

2022-01-20

In the process of the Peristaltic Pump transporting liquid, the liquid only flows through the hose and does not touch other parts of the pump body. What should be paid attention to when transporting bromine liquid? Here we explain in detail how to transfer bromine liquid with a peristaltic pump.
1. Turn on the preheating hose
Because the inner teflon hose is harder than the silicone tube, the inner teflon tube needs to be squeezed and softened at low speed when it is just started. Or at low speed, open the pump head extrusion rod, slowly press the extrusion rod down, and observe whether the hose is evenly squeezed. After the hose is evenly squeezed, the peristaltic pump can be gradually accelerated to increase the speed to the desired flow rate.
2. Auxiliary treatment at the liquid inlet of the hose
Do not contact the outer wall of the teflon hose with bromine because the outer wall of the teflon hose is not resistant to bromine corrosion. Connect the teflon pipe to the inlet of the hose, and then insert the teflon pipe into the bromine container, making sure that the lined teflon hose is not inserted into the bromine solution.
3. Use sparingly and replace teflon hose lining regularly

Due to the high cost of lining teflon hoses, when matching with peristaltic pumps, only 30cm of the hose is cut and used with the pump head, because the hose part is fixed by the pump head controls the overall flow. The rest of the transmission can be teflon tubes to save costs. For peristaltic pump, the hose is consumable, so it is necessary to regularly check the condition of the squeezed part of the hose, if there is anything abnormal (such as serious deformation and signs of tear), be sure to replace the hose in time. In case something unexpected happens.

If you need help,please contact:www.crpump.com, sales01@crpump.com,15633705132

Previous: How to install and pipe peristaltic pump

Next: How Much Pressure Can Peristaltic Pump Generally Achieve?